DADC-144DT 4-channel Dante<sup>®</sup> transceiver
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
Fjernlager
Varen er på fjernlager, leveringstiden er 6-8 hverdager. Mere info

Fri frakt - Hentes på Posten.

Se alle alternativer
Bring - Hentes på PostenGratis
Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)199,00
NOK 9.281,00
eksklusiv MVA 7.424,80
Totalt inkl. frakt 9.281,00
4-channel Dante® transceiver;#4 analogue XLR audio inputs;#4 analogue XLR audio outputs;# 4-channel Dante® input/output (EtherCon/RJ45);#Analogue input and output levels can be adjusted individually via recessed potentiometers;#48 V phantom power can be activated as required for each analogue input;#Mute function for each analogue output;#Dante® sources and Dante® receiver can be combined via software;#Encoding/decoding: 16/24/32 bits;#Sampling rates: 44.1/48/88.2/96 kHz;#Frequency range: 20-20,000 Hz;#LED display for indicating signal, peak, network link, network act and power;#Metal housing;#482 mm (19") rack installation, 1 RU;;
The brand Dante® as well as the Dante® software which may have been integrated into these products are licenced by Audinate Pty Ltd.;
  • 4-channel Dante® transceiver
;Manufacturer information:;MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
[email protected];Safety Notes and Warning Messages;The unit uses dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Inexpert handling may result in electric shock.
Do not operate the unit and disconnect the mains plug from the socket immediately if the unit or the mains cable is visibly damaged; if a defect might have occurred after the unit was dropped or suffered a similar accident, if malfunctions occur. In any case, the unit must be repaired by skilled personnel.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.