Varen er på fjernlager, leveringstiden er 3-4 hverdager. Mere info
Frakt 75,00 - Bring - Hentes på Posten.
Se alle alternativer
Bring - Hentes på Posten
75,00
Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer)
199,00
NOK
788,00
eksklusiv MVA 630,40
Totalt inkl. frakt
863,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister. Opprett bruker Login
Thermaltake Versa J25 Tempered Glass RGB Edition Mid-Tower Chassis\n\nDesigned for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.\n\n3 Built-in 120mm 12V RGB Fans\n\nVersa J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options. \n\nSync with Motherboard RGB Software\n\nDesigned to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software. Visit the support page for motherboard information or to download the software:\n\nBuilt-in RGB Switch Board\n\nThanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.\n\nBuilt-in PSU Cover\n\nThe J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.\n\nTempered Glass Window\n\nThe left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels. \n\nTool-Free Installation\n\nThe included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives. 3.5” or 2.5” HDD Drive Compatible \n\nSuperior Hardware Support\n\nBuild the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.\n\nExcellent Cooling Capability\n\nThe J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.\n\nAngular, Acrylic Front Panel\n\nThe front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.\n\nHandy I/O Ports\n\nThe top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.
Maskefrontpanel, støtter 120 mm-radiator bak, støtter 120/240/360-mm radiator i frontpanel, RGB-vifter, RGB-synkroniseringsstøtte for hovedkort
Strømenhet
Ingen strømforsyning (PS/2)
Dimensjoner (BxDxH)
20.6 cm x 40.2 cm x 46.1 cm
Vekt
6.2 kg
Generelt
Produktformfaktor
Tower
Vindusidepanel
Ja
Vindusidepanelmateriale
Herdet glass
Maks hovedkortsstørrelse
ATX
Støttede hovedbrett
ATX, microATX, Mini-ITX
Antall interne brønner
5
Produktmateriale
Herdet glass, SPCC-stål
Farge
Svart
Kjølesystem
Bak: 120 x 120 x 25 mm vifte x 1 / eksos / 1000 rpm / 16 dBA Foran: 120 x 120 x 25 mm vifte x 3 / inntak / 1000 rpm / 16 dBA / støtte for RGB-vifte, 2 x 140 mm-vifte Topp: 120/140 mm viftemontering x 2
Maks. CPU-kjølerhøyde
160 mm
Maks. videokortlengde
330 mm
Maks. strømforsyningslengde
160 mm
Systemkabinettfunksjoner
Maskefrontpanel, støtter 120 mm-radiator bak, støtter 120/240/360-mm radiator i frontpanel, RGB-vifter, RGB-synkroniseringsstøtte for hovedkort
Ekspansjon / Tilkoplinger
Ekspansjonsbrønner
2 (total) / 2 (ledig) x intern - 2.5" 3 (total) / 3 (ledig) x intern - 2,5" / 3,5" delt
Utvidelsesspor
7
Grensesnitt
2 x USB 3.0 2 x audio
Strømforsyning
Strømenhet
Ingen strømforsyning
Spesifikasjonssamsvar
PS/2
Størrelser og vekt
Bredde
20.6 cm
Dybde
40.2 cm
Høyde
46.1 cm
Vekt
6.2 kg
Vægt (gram)
7000
Produktet har følgende varenummer i vårt system:
SKU:
CA-1L8-00M1WN-01
EAN:
4711246874411
Hvorfor oplever jeg at den umiddelbart samme vare findes på forskellige varenumre?
Producenterne udgiver ofte den samme vare med forskellige varenumre, typisk handler det udelukkende om forskellige versioner af emballagen. Eksempelvis kan emballagen være målrettet forskellige lande.
Vi forsøger bedst muligt at samle varerne, men det kan opleves at den samme vare figurerer på forskellige varenumre i vores system.