NOK 0,00
(frakt: 0,00)
CBO GmbH BO35J856S3D, Fiber optisk, 10000 Mbit/s, SFP+, LC, SR, 300 m
Varenr.: [4140617] | Producent: CBO GmbH | Model-nr.: BO35J856S3D | EAN: 4063232626680
Fjernlager
Varen er på fjernlager, leveringstiden er 4-5 hverdager. Mere info
Frakt 75,00 - Bring - Hentes på Posten.
Se alle alternativer
| Bring - Hentes på Posten | 75,00 |
| Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer) | 224,00 |
NOK
683,00
eksklusiv MVA 546,40
Totalt inkl. frakt
758,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
Wide Range of Applications
The BlueOptics BO35J856S3D SFP+ transceivers have a receiving function (receiver) and a transmission function (transmitter) for the transfer of optical signals via multi-mode fiber, regarding the respective 10 gigabit protocol, such as the 10GB Ethernet 802.3ae standard. BlueOptics BO35J856S3D SFP+ modules are suitable for the use in switches, routers, storage systems and other hardware in the first optical window at 850nm.
Data Transmission at the Speed of Light
Increase your bandwidth and lower the latency. BlueOptics BO35J856S3D SFP+ transceivers transmit and receive signals via one optical fiber and have a duplex connector. The connection takes place via a BlueOptics Patch Cord onto a patch panel or directly to another transceiver.
Error Analysis with Digital Diagnostics
Facilitate troubleshooting, maintenance and monitoring in your network through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. Using the digital diagnosis function, compliant with MSA SFF-8472, BlueOptics BO35J856S3D SFP+ transceivers provide real time information like Supply Voltage, Laser Bias Current, Laser Average Output Power, Laser Received Input Power and Temperature.
Maximum Availability
Less maintenance due to a long lifetime. BlueOptics BO35J856S3D SFP+ transceivers only use components of leading manufacturers for Lasers (i.a. Lumentum, Avago, Mitsubishi, Sumitomo) and Integrated Circuits (i.a. Maxim Integrated, Netlogic, Mindspeed, Analog Devices). BlueOptics BO35J856S3D SFP+ transceivers are designed for an above-average operating time of approximately 3.000.000 MTBF hours.
Full MSA Compliance
BlueOptics BO35J856S3D high availability SFP+ transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the transceiver to ensure the interoperability. Here the SFP+ interface is defined electrically, mechanically and functionally.
Industrial Standards
BlueOptics BO35J856S3D high availability SFP+ transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process, according to ISO9001, CBO reaches a steady quality of each BlueOptics BO35J856S3D SFP+ transceiver.
Act now!
By using BlueOptics high availability transceivers, networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics transceivers you can improve your connections and reduce your CAPEX for pluggable optics up to 90%.
The BlueOptics BO35J856S3D SFP+ transceivers have a receiving function (receiver) and a transmission function (transmitter) for the transfer of optical signals via multi-mode fiber, regarding the respective 10 gigabit protocol, such as the 10GB Ethernet 802.3ae standard. BlueOptics BO35J856S3D SFP+ modules are suitable for the use in switches, routers, storage systems and other hardware in the first optical window at 850nm.
Data Transmission at the Speed of Light
Increase your bandwidth and lower the latency. BlueOptics BO35J856S3D SFP+ transceivers transmit and receive signals via one optical fiber and have a duplex connector. The connection takes place via a BlueOptics Patch Cord onto a patch panel or directly to another transceiver.
Error Analysis with Digital Diagnostics
Facilitate troubleshooting, maintenance and monitoring in your network through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. Using the digital diagnosis function, compliant with MSA SFF-8472, BlueOptics BO35J856S3D SFP+ transceivers provide real time information like Supply Voltage, Laser Bias Current, Laser Average Output Power, Laser Received Input Power and Temperature.
Maximum Availability
Less maintenance due to a long lifetime. BlueOptics BO35J856S3D SFP+ transceivers only use components of leading manufacturers for Lasers (i.a. Lumentum, Avago, Mitsubishi, Sumitomo) and Integrated Circuits (i.a. Maxim Integrated, Netlogic, Mindspeed, Analog Devices). BlueOptics BO35J856S3D SFP+ transceivers are designed for an above-average operating time of approximately 3.000.000 MTBF hours.
Full MSA Compliance
BlueOptics BO35J856S3D high availability SFP+ transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the transceiver to ensure the interoperability. Here the SFP+ interface is defined electrically, mechanically and functionally.
Industrial Standards
BlueOptics BO35J856S3D high availability SFP+ transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process, according to ISO9001, CBO reaches a steady quality of each BlueOptics BO35J856S3D SFP+ transceiver.
Act now!
By using BlueOptics high availability transceivers, networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics transceivers you can improve your connections and reduce your CAPEX for pluggable optics up to 90%.