Żelazko Lafe LAF02B

Very functional steam iron with a power of 2200W. Durable ceramic plate and relatively lightweight construction make it perfect for use on any type of fabric. Attractive design, solid construction, rubberized handle and rubber washers on the back are undoubtedly the best features of this iron. The iron is equipped with many useful features:

Spray: the spray function can be used regardless of other settings. Spraying is activated by button on the handle. In order for this function to work, it may be necessary to press the spray button several times.

Steam ironing: Set the steam switch to the right position ("Min" indicates the smallest number of steam, and "Max" - the largest). The amount of steam is also dependent on thermostat setting-at lower temperature (one dot or two dots) it is smaller, and at higher temperature (three dots) it is larger.

Steam burst: This function causes a one-time ejection of high steam output. 80 g for better effect when ironing difficult or uneven fabrics. Note that the steam burst function works properly only with the (three dots) or "Max" setting. After pushing the button on the handle, a powerful burst of steam will be ejected from the openings on the sole of the iron. If necessary, you can repeat the operation after waiting for a few seconds. It is not recommended to use this function more than three times in a row. Note: in order to use this function, it may be necessary to press the "steam burst" button repeatedly.

Vertical steam ironing: This function utilizes the impact of steam with the only difference being that the iron is placed in a vertical position. When using this feature, hold the iron at a distance of about 15-30 cm from the fabric.

Anti-Calc self-cleaning system: The iron is equipped with a self-cleaning system designed to prevent calcium and mineral deposits. Note: Although the iron is equipped with a built-in system for preventing calcium deposits, which aims to reduce the formation of scale during ironing with steam, it is not able to stop this natural process completely. That is why pieces of scale may sometimes be ejected from the openings in the sole while ironing.

Self-Cleaning System: This function is used to remove the calcium and mineral deposits from the device. It is recommended to perform decalcification at least once a month. The frequency depends on the hardness of the water used, the harder the water, the more often you should clean the iron. The function is initiated with the Self-Cleaning button.

Anti-Drip system is a system that prevents water from dripping out of the iron sole at low temperatures. The system works automatically. When ironing, it may emit a loud, hissing sound, particularly during heating and cooling. This phenomenon is perfectly normal and indicates that the system is working correctly.

Auto-STOP system Auto-STOP is a system that automatically turns off the iron, if left unattended when connected to power. This system is very sensitive and may become activated (turn off the iron) when ironing speed is too slow. All you need to do is move the iron for it to turn back on.

Auto STOP in a horizontal position If a connected iron is left unattended in a horizontal position, the system will respond in about 30 seconds. After this time, the iron will be automatically disabled — you will hear a short beep.

Auto STOP in a vertical position If a connected iron is left unattended in a vertical position, the system will respond in about 8 minutes. After this time, the iron will be automatically disabled — you will hear a short beep. Move the iron dynamically for it to turn back on.