0,00
(frakt: 0,00)
Gembird - Gul - 1 kg - gul - fargeboks - PETG-filament (3D)
Varenr.: [21455454] | Producent: Gembird | Model-nr.: 3DP-PETG1.75HY-01-Y | EAN: 8716309131735
Lager
På lager, bestill innen kl. 12:00 så sender vi det samme dag (hverdager). Mere info
Frakt 75,00 - Bring - Hentes på Posten.
Se alle alternativer
| Bring - Hentes på Posten | 75,00 |
| Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer) | 199,00 |
Lagerkampanje
Det er 4 på lager
Den aktuelle pris gælder kun så længe lokalt lager haves
NOK
268,00
eksklusiv MVA 214,40
Totalt inkl. frakt
343,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
Kenmerken:
High speed filament for fast printers like Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron printers
Fits perfectly in Bambu Labs Automatic Material System
Suitable for CoreXY machines
Printing at the highest speed in sport and ludicrous mode
The filament with improved melting possibility that helps to print with higher speed
Very high strength filament
Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate
Chemical Resistant - offers superior chemical resistance when compared with many other transparent plastics
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform
Specificaties:
Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 25°C: 1.27 g/cm3
Melt Flow Index at g/10 min, 200°C/ 2.16kg: >14
Melt Point: 220 - 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 50 mm/min: 47 MPa
Printing speed: 60-600 mm/s
Impact Strength: 8.7 KJ/m2
Ensile Break: 3-4 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 198 mm diameter x 67 mm height x 55 mm central hole
Systemeisen:
A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament
High speed filament for fast printers like Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron printers
Fits perfectly in Bambu Labs Automatic Material System
Suitable for CoreXY machines
Printing at the highest speed in sport and ludicrous mode
The filament with improved melting possibility that helps to print with higher speed
Very high strength filament
Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate
Chemical Resistant - offers superior chemical resistance when compared with many other transparent plastics
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform
Specificaties:
Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 25°C: 1.27 g/cm3
Melt Flow Index at g/10 min, 200°C/ 2.16kg: >14
Melt Point: 220 - 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 50 mm/min: 47 MPa
Printing speed: 60-600 mm/s
Impact Strength: 8.7 KJ/m2
Ensile Break: 3-4 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 198 mm diameter x 67 mm height x 55 mm central hole
Systemeisen:
A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament