Lageragent opprettet, vi sender en mail når varen er på lager igjen!
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister. Opprett bruker Login
The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety and sturdily to your ceiling.
We only have one projector ceiling bracket in our range: it comes with a 1.1m pole and it is designed to be useful in 99% of installations. That means built in flexibility allowing quick assembly in a number of different configurations, including "flush-mount" where the projector is as close to the ceiling as possible.
We believe the fixed pole style we use is the best for rigidity, and because you cut it to length onsite, it has an infinitely variable length.
Safety Approved We believe it is good practise to use a safety fall-arrest tether which secures the projector to your bracket, so we've included one.
20kg SWL Independent testing on calibrated hydraulic test equipment has shown a breaking-strain of half a ton! We recommend a maximum safe working load of 20kg which is well within it's limits.
Obstruction-free Cable Management Rather than having a long bolt that runs through the pipe and blocks cable access, we use our unique quad-bolt Chute-through system which leaves cable access clear - even for a big VGA connector.
Secure We believe quick-release mechanisms make life easier for thieves, so our mount is secure and features security bolts.
Sloping Ceilings? If you have a sloping ceiling there is a tilting mechanism included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.
Tools Included A spanner and pin-hex key are included. The only tool you'll need is a 2" pipe cutter (NOT INCLUDED - ask your hardware supplier for a pipe cutter with a 6-67mm range, and a metal cutting disk). With this tool you'll cut the pole like a knife through butter. We've also included a drilling jig so you can easily and accurately drill 9mm holes into the pole.
Easy fit Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. But because not all use the same diameter screws we provide a selection of screws to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, and insert a screw into the projector. Finish the job properly!
TM-1200 Trim Disk Aesthetics are also enhanced by our exclusive retrofittable trim disk which is fitted to the pole in false-ceiling environments to properly finish the installation.
Produktbeskrivelse
Vision TM-1200 monteringssett - for projektor - satenghvit
Produkttype
Monteringssett - takmonterbar
Monteringskomponenter
Takmontering
Justeringer
Helling
Anbefalt bruk
Projektor
Maks lastevekt
10 kg
Farge
Satenghvit
Fabrikantgaranti
Begrenset livstidsgaranti
Generelt
Farge
Satenghvit
AV-møbler
Type
Monteringssett
Monteringskomponenter
Takmontering
Anbefalt bruk
Projektor
Plassering/montering
Takmonterbar
Justeringer
Helling
Maks lastevekt
10 kg
Fabrikantgaranti
Service og støtte
Begrenset livstidsgaranti
Produktet har følgende varenummer i vårt system:
EAN:
1562435000004
SKU:
TM-1200
Hvorfor oplever jeg at den umiddelbart samme varer findes på forskellige varenumre?
Producenterne udgiver ofte den samme varer med forskellige varenumre, typisk handler det udelukkende om forskellige versioner af emballagen. Eksempelvis kan emballagen være målrettet forskellige lande.
Vi forsøger bedst muligt at samle varerne, men det kan opleves at den samme varer figurerer på forskellige varenumre i vores system.