0,00
(frakt: 0,00)
Kitronik 25104, Konsollblokk, Blå, Gjennomsiktig, 125 mm, 85 mm, 38 mm
Varenr.: [5882268] | Producent: Kitronik | Model-nr.: 25104 | EAN: 6609025148854
Ikke på lager
Varen er ikke på lager.
Fri frakt med Bring(HD) - Hjemlevering - Levering til nærmeste fortauskant.
Utsolgt
Varen er ikke på lager.
NOK
2.269,00
eksklusiv MVA 1.815,20
Totalt inkl. frakt
2.269,00
Gi meg beskjed når varen er på lager igjen.
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
Add a servo powered gripper to your robotics project with the Kitronik Klaw Mk2 Robotic Gripper. This easy to assemble kit also comes with the required servo.
The Kitronik Klaw MK2 Robotic Gripper Kit is the latest version of the original and popular Kitronik Klaw and is a great addition to any robotics or buggy project.
It has been carefully redesigned so that it is now also compatible with both the MOVE:mini Mk1 and Mk2. On Mk1 it can be mounted to the boot lid and on the MK2 it can be added to both the boot lid and the base plate. Extra holes were added and a slight change to the part which holds the servo was made to facilitate this.
It is controlled by a low voltage servo which is included, this servo is used to open and close the Klaw.
At the rear of the unit are mounting points allowing it to be bolted to other items, such as buggies or robotic arms. Supply voltage: 3V to 6V. Supplied as a set of parts that require simple assembly, see the resources section below for build instructions.
The Kitronik Klaw MK2 Robotic Gripper Kit is the latest version of the original and popular Kitronik Klaw and is a great addition to any robotics or buggy project.
It has been carefully redesigned so that it is now also compatible with both the MOVE:mini Mk1 and Mk2. On Mk1 it can be mounted to the boot lid and on the MK2 it can be added to both the boot lid and the base plate. Extra holes were added and a slight change to the part which holds the servo was made to facilitate this.
It is controlled by a low voltage servo which is included, this servo is used to open and close the Klaw.
At the rear of the unit are mounting points allowing it to be bolted to other items, such as buggies or robotic arms. Supply voltage: 3V to 6V. Supplied as a set of parts that require simple assembly, see the resources section below for build instructions.